UK153- $19.95
CK153- $15.95
5W Audio Amplifier
| This circuit
is a compact design AF amplifier based on the TBA810 Integrated
Circuit. Its low consumption and compact dimensions make it ideal
for all kinds of audio amplification applications. The circuit incorporates
an overload protection circuit and volume control. In addition,
the circuit has low/high impedance inputs that can be connected
to any audio source. Supply voltage: 12 - 16V DC @ 0.5A
|
UK122-
$25.95
CK122-
$19.95
Mini Walkman Stereo Amplifier
| A
very compact mini stereo amplifier that can be connected to the
headphone jack of any Walkman, Discman, MP3 Player or any other
stereo audio source. It is based on two LM386 low-voltage power
amplifiers and provides up to 1W of music power for each channel.
Includes all cables and plugs. Supply voltage: 6 - 12V DC @ 200mA.
Includes 4 x AA size battery holder. |
UK154- $34.95
CK154- $26.95
2 x 5W Walkman Stereo Amplifier
| This circuit
can change your Walkman into a stereo system with enough power to
fill a large room with stereo sound. Features include temperature
compensation, output short-circuit and overload protection. In addition,
the circuit has low/high impedance inputs that can be connected
to any stereo audio source such as a Walkman, portable CD player,
MP3 player, etc. Supply voltage: 12 - 16V DC @ 1A. |
UK151- $22.95
CK151- $17.95
2.5W Amplifier with Microphone Pre-Amp
| A simple
amplifier built around the LM380 Integrated Circuit. Includes a
pre-amplifier circuit for a dynamic microphone that can be connected
to the PC board mounted jack. It will deliver up to 2W of power
into an 8-Ohm speaker. Supply voltage: 10 - 18V DC @ 300mA. |
UK254- $31.95
CK254- $25.95
2 X 10W Stereo
Amplifier
| A stereo
amplifier that will convert your Walkman, Discman or MP3 player
into a stereo system with enough power to fill a large room with
stereo sound. Features include temperature compensation and overload
protection. Supply voltage: 12 to 18V DC @ 1 to 1.5A.
|
UK194- $33.95
CK194- $25.95
2 X 20W Bridged
Stereo Power Amplifier
| This
circuit consists of two separate 20W bridged power amplifiers (one
for each channel) based on four TDA2003 monolithic Integrated Circuits
to deliver more than 40W of music power into a pair of 4 Ohm speakers.
Running on 12V DC, this stereo amplifier is ideal for use in the
car to boost the audio power or to power additional speakers. Supply
voltage: 12 - 18V DC @ 3 - 4A. |
UK250-
$49.95
CK250-
$43.95
2 x 25W (RMS) Hybrid
Stereo Power Amplifier
| A high quality,
low noise stereo audio power amplifier based around the Hybrid Integrated
Circuit STK4392 manufactured by Sanyo. The circuit has a maximum
music output power of 40W per channel (20W per channel RMS). Supply
voltage: 30 - 45V DC @ 1A. |
UK260- $59.95
CK260- $52.95
2 x 25W (RMS) Hybrid Stereo Power Amplifier with Power Supply
| A complete
high quality, low noise stereo audio power amplifier based around
the Hybrid IC STK4392. The circuit incorporates PC board mounted
volume and balance controls and has a maximum music output power
of 35W per channel. The circuit incorporates an on-board power supply.
Supply voltage: 24 - 32V AC @ 2A. |
UK193- $19.95
CK193- $15.95
20W Bridged Power Amplifier
| A compact,
yet powerful audio amplifier using two TDA2003 monolithic Integrated
Circuits connected in bridged configuration to achieve more output
power at 12V DC supply. It can deliver more than 20W of music power
into a 4-Ohm speaker and is ideal for any kind of audio amplification
application. Supply voltage: 12 - 18V DC @ 2A. |
UK145-
$37.95
CK145
$31.95
5-Band Hi-Fi
Stereo Equalizer
| The
state-of-the-art monolithic IC design of this circuit will improve
the response characteristics of any stereo amplifier. It incorporates
5 dual PC board mounted potentiometers. Supply voltage: 6 - 14VDC
@ 50mA. Recommended adapter: RP-1240R-P. |
UK134- $28.95
CK134- $22.95
2-Program (Dot or Bar) 10-LED VU-Meter
| This audio
level indicator uses 10 LEDs and features two programs: "BAR"
and "DOT". The input sensitivity can be adjusted and therefore
it can be used with power amplifiers from 1 to 50 Watts. It uses
3 different coloured LEDs. Supply voltage: 6 - 18 VDC @ 100mA. |
UK106- $24.95
CK106- $18.95
2 x 5-LED Stereo VU-Meter
| A compact
stereo VU-Meter based on two Integrated Circuits which ensure a
high input sensitivity. The sensitivity of each channel is independently
adjustable. It comes with green, yellow and red LEDs. Supply voltage:
4 - 14VDC @ 100mA. |
UK185- $49.95
CK185- $39.95
3-Channel IC Colour Organ with Built-In Mike and Line-In
| The circuit
is based on an Integrated Circuit which provides three sharp active
filters for each channel. Three independent controls vary the amount
of light for low, midrange and high frequencies. In addition, a
built-in microphone is incorporated which allows the circuit to
capture the ambient sound and to operate without requiring a connection
to your stereo system. The circuit can handle up to 200W of lights
per channel. Supply voltage: 18V AC C.T. @ 100mA. |
UK144- $25.95
CK144- $20.95
10W / 4-Sound
Siren
| Creates
police, fire engine and ambulance sirens plus machine gun sounds.
It is great for any sound effect needs and can also be used for
alarm sounds for a security system. Maximum output power: 10W. Supply
voltage: 6 - 12V DC @ 1A. Includes 6 x AA battery holder |
Part No. UK324- $25.95
CK324- $19.95
Super Sensitive 2 x 8-LED Mono Audio Level Indicator
| This
super sensitive LED VU-Meter incorporates its own pre-amplifier
and therefore it can be connected directly to the line-out of any
audio source. It uses 2 rows of 8 LEDs which creates a fantastic
light display. Supply voltage: 9 - 12V DC @ 200mA. |
|
