419B-340g (12 oz)

Acrylic Conformal Coating 419B

excellent water resistance, hard and durable, fast dry, low cost

Protects printed circuit boards against moisture, corrosion, and thermal shock. Protects and insulates electrical and electronic components and assemblies, including generators, motors, transformers, relays, and solonoid coils.

• Clear tough protective coating
• Protects against static discharge
• service temperature limits: 65° C
• solids by volume: 18%
• solids by weight: 25%
• viscosity: 50-55, 20-25 Sec.s NBR.
• Easy to repair
• UV indicator added for O.C. inspection
• Remove with M.G. Chemicals cat# 831 Conformal Coating Stripper
• Clean up with M.G. Chemicals cat# 435 Conformal Coating Thinner Cleaner

MSDS for 419B Acrylic Conformal Coating Liquid
MSDS for 419B Acrylic Conformal Coating Aerosol

Green Conformal Overcoat Pen 4190-GP

Pen applicator, excellent water resistance, hard and durable, fast dry,
low cost

Protects printed circuit boards against moisture, corrosion, and thermal shock. Protects and insulates electrical and electronic components and assemblies, including generators, motors, transformers, relays, and solonoid coils. Convenient pen applicator for precision work.

• Clear tough protective coating
• Protects against static discharge
• service temperature limits: 65° C
• solids by volume: 18%
• solids by weight: 25%
• viscosity: 50-55, 20-25 Sec.s NBR.
• Easy to repair
• UV indicator added for O.C. inspection
• Remove with M.G. Chemicals cat# 831 Conformal Coating Stripper
• Clean up with M.G. Chemicals cat# 435 Conformal Coating Thinner Cleaner

MSDS for 4190-GP Green Conformal Overcoat Pen

Silicone Conformal Coating 422A

excellent water resistance, excellent temperature resistance,
excellent electrical properties, good flexability.

Protects printed circuit boards against moisture, corrosion,
and thermal shock.

• Clear tough protective coating
• Protects against static discharge
• Remains flexible from -65° C to 200° C
• Dries in minutes - cure time 4 to 12 hours at room temperature.
• No catalyst needed. (May be accelerated by heating to a maximum of 212° F or 100° C using an air circulation oven, up to one hour)
• CSA tested
• Meets MIL-1-46058C type SR
• Easy to repair
• Remove with M.G. Chemicals cat# 831 Conformal Coating Stripper
• Clean up with M.G. Chemicals cat# 435 Conformal Coating Thinner Cleaner
• UV indicator added for O.C. inspection

Dielectric properties:

• dielectric strength: 80 kv/mm
• dielectric constant @ 100MHz, 2.7
• loss angle tangent @ 100 MHz, 0.001
• volume resistivity, CM 1x 10 Exp(14)

Directions of use:

Spray an even coat with a minimum application of .048 grams per square centimeter. Application measurements can be achieved by first weighing the can, then spraying an even coat, then reweighing the can. Knowing the dimensions of your board, one can calculate as to whether your application is within certified limits. Allow 24 hours for a full cure dry and 30 to 60 minutes for touch dry.

MSDS for 422A Silicone Conformal Coating Liquid
MSDS for 422A Silicone Conformal Coating Aerosol

Encapsulating and Potting Epoxy Compound 832B

excellent water resistance, incredible physical strength, excellent chemical
resistance, excellent electrical properties, good flexability

Protects sensitive electronic components from impact,
shock, vibration, heat, conductivity, moisture, chemicals, and visual inspection.

Features:

• Non-porous, water and chemical resistant
• Extremely impact resistant (contains a form of nylon)
• Colored black, to prevent visual inspection
• Affords total security, once cast it can not be removed
• Excellent machining properties
• Non-conductive, an electrical insulator
• Low toxicity
• Suitable for explosion proof components (spark arresting)
• Easy and simple to mix
• Long pot life
• Can be cured in one hour at 65°C (150°F)

MSDS for 832B Epoxy Compound Part A
MSDS for 832B Epoxy Compound Part B

832-FRB-450ml (16 oz)

Flame Retardant Potting & Encapsulating Epoxy Compound 832-FRB

protection from static discharge, impact, heat, shock, conductivity, abuse, vibration, moisture, fresh and salt water, chemicals and analysis.

Meets UL 94V-0
Vertical Burn Test

A two component self extinguishing epoxy compound. Provides insulation and protects sensitive components and circuits from: static discharge, impact, heat, shock, conductivity, abuse, vibration, moisture, fresh and salt water, chemicals and analysis. Blue in color.

MSDS for 832-FRB Flame Retardant Epoxy Compound Part A
MSDS for 832-FRB Flame Retardant Epoxy Compound Part B

832-TC

Thermally Conductive Epoxy Encapsulating & Potting Compound
832-TC

Provides insulation and protects sensitive components and circuits

100% solids. Formulated with undiluted Bis F resin for superior physical properties, and pigmented with high purity aluminum oxide pigment to provide excellent thermal conductivity at reasonable cost. Pigmented black for excellent thermal absorption and emission.

• Provides superior protection from impact, shock, con-ductivity, moisture, abuse, chemicals, and analysis
• Two part epoxy, with a 1 to 1 mixing ratio by volume.
• Two hour working time
• Suitable for large production runs
• Cures in 2 days at room temperature or one hour at 65°C.

Chemical Properties
Thermal Conductivity: 0.682 W/m*K
Thermal Diffusivity: 0.38 mm2/s
Volumetric Specific Heat: 1.9 MJ/m3 *K

MSDS for 832-TC Thermally Conductive Epoxy Compound Part A
MSDS for 832-TC Thermally Conductive Epoxy Compound Part B